Home > Wholesale Amber Bottle Order Desk

Wholesale Amber Bottle Order Desk

Plastic Amber Bottles – Wholesale Amber Bottle Desk

Wholesale Amber Bottle Order Desk

This order desk is built for buyers who need plastic amber bottles in sensible quantities instead of pallet loads: 473 ml / 16 oz PET rounds or squares, from 2 pieces, with most orders leaving the warehouse inside 24 hours. Every figure below comes from the same published tier sheet, so you can compare amber medicine bottles by unit cost, cap style and label option before a purchase order is raised.

  • 2 pcs Minimum order
  • 24 h Dispatch on most orders
  • US + CA Shipping coverage
  • 10,000 Pieces per order ceiling
473ml Amber PET Bottles Hi-Tech Cough Syrup 16OZ Bottle with Red Writing Lids QR Code

Pick the Shape Before You Price the Order

Both 473 ml options carry a $0.00 option surcharge, so the round-or-square decision changes how the bottle presents on shelf, not what you pay per unit.

473 ml round amber PET cough syrup bottle with red-writing lid
$0.00 option surcharge 2-pc minimum

473 ml Round

16 oz round profile in amber PET with a 0.5 mm wall and a matte finish. Fitted with a red-writing screw cap and set up for QR-code integration.

Configure the round bottle →
473 ml square amber PET cough syrup bottle with screw cap
$0.00 option surcharge 2-pc minimum

473 ml Square

The same 473 ml / 16 oz PET body and screw-cap closure in a square profile, so the shape selector costs nothing extra at any quantity band.

Configure the square bottle →

Both shapes share one pricing ladder, one cap type and one silk-screen printing method — the selection happens on the product page before the bottle reaches the cart.

MOQ and the Price-Tier Ladder

Per-unit USD pricing as published on the product page. There is no separate wholesale account required: the same ladder applies from a two-bottle check order up to a 10,000-piece run.

Quantity band Per unit (USD) Typical buyer
2 – 4 pcs $24.80 Sample and single-bottle checks
5 – 9 pcs $16.80 Short trial run
10 – 19 pcs $9.80 Small dispensary top-up
20 – 49 pcs $8.80 Shelf restock for one site
50 – 99 pcs $6.80 Multi-site replenishment
100 – 9,999 pcs $5.80 Private-label production
10,000 pcs Volume enquiry Full ceiling of a single order

Worked example: 10 pieces at $9.80 costs $98.00; 100 pieces at $5.80 costs $580.00. The per-bottle price falls roughly 41% between those two bands, which is why most repeat buyers push a first production order past the 100-piece step rather than reordering small. Tier prices are published per unit — confirm the live figure on the product page before you raise a purchase order.

What Actually Arrives in the Box

The kit is supplied partly unassembled, and that shapes how you plan your first fill run.

Amber PET medicine bottle kit with cap, seal and label components
  • Empty bottles, caps, seals, labels and heat-shrink film are all included in the kit.
  • Bottles ship empty — nothing is pre-filled at any order size.
  • The seal is not inserted inside the cap; it is supplied loose so your team inserts it before filling.
  • Labels are not affixed. They ship separately, which means your labelling step is planned on your side.
  • Caps carry the red-writing lid format, with QR-code integration supported on the closure.

Buyer decision: if seal insertion or labelling would slow your line, raise it with the team before committing to a large run — both are steps the kit expects you to perform, not steps that arrive finished.

Specification Sheet: 473 ml Amber PET Bottle

The attributes that decide whether this bottle fits your fill line, your label artwork and your pharmacy shelf.

473ml Amber PET Bottles Hi-Tech Cough Syrup 16OZ Bottle with Red Writing Lids QR Code
Brand / model High Tech, model 15
Capacity 473 ml / 16 oz
Material PET — body, base and collar
Colour / finish Amber, matte surface
Wall thickness 0.5 mm
Shape Round or square (selectable)
Closure Screw cap, red-writing lid, QR-code option
Decoration Silk-screen printing
Industrial use Medicine / liquid pharmaceutical packaging
Order limits Minimum 2 pcs · maximum 10,000 pcs per order
Packed unit 0.300 kg · 6 × 6 × 6 cm
Place of origin China
  • The product page states the amber tint blocks up to 99% of UV rays — the reason this body suits light-sensitive liquid medicines.
  • The screw cap is described as a tamper-resistant seal with leak-proof handling.
  • The bottle is listed as fully recyclable, which matters if your buyer spec asks for a recyclable primary pack.

Match Your Order Size to the Right Configuration

Four buying situations, each tied to a published specification and a clear next step.

Independent pharmacy topping up shelf stock

Specification fit
473 ml round, amber PET, screw cap with red-writing lid, 2-pc minimum.
Decision
Order inside the 20–49 band at $8.80 per unit rather than the 10–19 band at $9.80; the extra bottles cost less per unit than the smaller run.

Private-label OTC launch

Specification fit
100–9,999 pieces at $5.80 per unit, silk-screen printing, matte surface, QR-code cap.
Decision
Confirm artwork and label supply early — labels ship separately and are not affixed, so your labelling step sits between delivery and shelf.

Clinic or urgent-care dispensary

Specification fit
Sealed presentation with cap, loose seal insert and heat-shrink film included in the kit.
Decision
Plan an insertion step for the loose seals, and keep a small buffer above the 5–9 band so a busy week does not empty the shelf.

Distributor or e-commerce liquid seller

Specification fit
Order ceiling of 10,000 pieces; packed unit 0.300 kg at 6 × 6 × 6 cm.
Decision
The 10,000-piece band is handled as a volume enquiry, so request a quote before you commit the top of your range to a single shape.

Customization and the Three-Step Order Path

Printing, labelling and tracking options are chosen at the same time as quantity, not after the bottles ship.

Silk-screen printing

The listed printing method, used for regulatory text and brand marks directly on the amber body. Because the surface is matte, printed blocks read cleanly against the bottle colour.

QR-code caps and labels

The closure supports QR-code integration for inventory tracking and brand differentiation. Labels are supplied separately and apply on your side, so artwork approval is a separate checkpoint.

1

Choose shape and quantity

Select round or square on the product page, then set a quantity inside a price band. Both shapes sit at the same tier, so quantity is the only lever on unit cost.

2

Confirm print and label work

Silk-screen print and QR-code placement are confirmed before production. Printed orders need artwork sign-off, so ask the team for timing before you release a large run.

3

Dispatch and tracking

Most orders ship within 24 hours, free of charge, to addresses in the United States and Canada, with package tracking available once the order is on its way.

Need a Volume Price, a Mixed Quote or a Sample?

Tell the team your shape, quantity band and whether silk-screen printing or a QR-code cap is required, and they will confirm current per-unit pricing, dispatch timing and delivery to your US or Canadian address.

Request a Quote

Related Reading

Three notes to help clarify product requirements before contacting the supplier.

Tamper Evident Seals on Amber Medicine Bottles With Screw Caps

A tamper evident seal on an amber medicine bottle is built from three separate parts, and each part answers a different question about package integrity.

Read article

How Do Amber PET Bottles Block UV Light in Liquid Medicine Packaging?

Amber PET bottles absorb short-wavelength light inside the bottle wall before it reaches the liquid, and the up-to-99% UV figure describes that filtering, not a total blackout.

Read article

What Are 473 ml Amber PET Bottles Used for in Oral Liquid Packaging?

These bottles are empty packaging kits rather than finished medicines, and understanding their capacity, material, and separate parts shows exactly where they fit in oral liquid work.

Read article

Frequently Asked Questions

What information is shown for this product?

Review the product details, images, and specifications presented on the official product page.

Where can i check the intended application?

Use the application and use-case information published on the official product page.

Which specifications should i confirm before ordering?

Confirm the specifications and options listed for the exact product variant before placing an order.

Where can i check available options?

Check the official product page or ask the supplier about options shown for the selected product.

How can i request product information?

Use the official contact or inquiry path provided on the site.

What should i include in an inquiry?

Include the product page, intended use, required quantity, and any specifications you need the supplier to review.